Valspar Supreme Edge Exterior Paint & Primer – Flat Finish, White (0.946 L)

Protect and beautify your home’s exterior with Valspar Supreme Edge Exterior Paint & Primer in a ready-to-use White with a Flat finish. This advanced 100% acrylic formula provides excellent durability for years of protection against the elements.   

Enjoy fade-resistant color that maintains its look season after season. This paint offers great hide and coverage, simplifying your painting project. Engineered to resist cracking and peeling, it forms a tough, reliable bond with properly prepared surfaces. The finish is also resistant to mold and mildew growth, helping to keep your home looking clean and fresh. As a combined paint and primer, it streamlines application on many surfaces.   

Recommended Surfaces: Properly prepared exterior surfaces including wood, hardboard, aluminum siding, vinyl siding*, masonry, brick, stucco, cement composition panels, and primed metal. Not for use on floors. (Note on Vinyl Siding: Do not paint vinyl siding with a color darker than the original color, as heat absorption can cause warping.)

Surface Preparation: Remove surface contaminants with an appropriate cleaner, rinse thoroughly, and allow to dry completely. Scrape away loose or peeling paint and sand damaged areas smooth. Dull glossy surfaces by sanding. Seal stains (rust, tannin bleed, etc.) with an appropriate stain-blocking primer before painting. Caulk around windows, doors, and other openings after spot priming any bare surfaces. Knots and some woods (like redwood, cedar) contain tannins; the first coat may show some staining, but a second coat will typically provide a uniform appearance. If staining persists, spot prime severe areas with a quality stain-blocking primer.

Application Instructions: Stir paint thoroughly before and during use. If using multiple containers, intermix them to ensure uniform color. Apply only when paint, surface, and air temperatures are between 35°F and 90°F (2°C – 32°C) and expected to remain so during the entire application and drying time. Do not paint if temperatures are expected to drop below 35°F (2°C) within 48 hours of application. Avoid painting in direct, hot sun, or when heavy dew or precipitation is expected within the next 2.5 hours. Apply using a quality brush, roller, or airless sprayer according to manufacturer’s directions.

Clean-up & Disposal: Clean tools and spills immediately with warm, soapy water. Do not pour unused paint down the drain. Consult local authorities for proper disposal and recycling methods in your area.

Specifications:

• Brand: Valspar
• Product Line: Supreme Edge Exterior
• Type: Exterior Paint & Primer
• Base: 100% Acrylic (Water-Based)
• Finish: Flat
• Color: White
• Size: 0.946 Litres (Approx. 1 US Quart)
• Recommended Surfaces: Wood, Hardboard, Vinyl Siding*, Aluminum Siding, Masonry, Brick, Stucco, Cement Panels, Primed Metal (See notes above). Not for floors.
• Application Temperature: 35°F – 90°F (2°C – 32°C)
• Dry Time (@ 77°F / 50% RH): Touch: 1-4 hours; Recoat: 2-4 hours
• Cleanup: Warm, soapy water
• Key Features: Paint & Primer, Fade-Resistant, Crack & Peel Resistant, Mold & Mildew Resistant Finish, Great Hide & Coverage
• Weight: Information not provided
• Coverage Rate: Information not provided (Check label – varies by surface)