Valspar Pro-Hide Gold Ultra Interior Clear Finish – Flat (17.1 L)

Add a protective final layer with minimal sheen using Valspar Pro-Hide Gold Ultra Interior Clear Finish. This product provides a durable, water-based (assumed) topcoat in a Flat (Matte) sheen, designed to complement the Pro-Hide Gold Ultra paint line. It is likely formulated with Zero VOCs*, making it suitable for projects where indoor air quality is crucial. (Confirm VOC content and compatibility on product label)

This clear finish helps shield underlying surfaces from scuffs, dirt, and wear without adding gloss, preserving the original color and appearance. The flat sheen is ideal for maintaining a non-reflective look on walls or trim while boosting durability. Expect easy application (brush/roll/spray) and simple soap-and-water cleanup, consistent with the Pro-Hide Gold Ultra line.

Recommended Uses: As a protective clear topcoat over compatible*, fully cured Pro-Hide Gold Ultra (or similar) interior painted surfaces (walls, trim) or directly on properly prepared interior wood where a clear, flat protective finish with low/zero VOCs* is desired. Not for use on floors. (Always verify compatibility)

Surface Preparation:

• Over Paint: Ensure the underlying paint is fully cured (allow ample time, typically several days to weeks depending on paint type and conditions), clean, dry, and sound.
• Bare Wood/Other Surfaces: Surface must be clean, dry, and free of contaminants. Sand smooth. Seal stains or prime if needed with compatible products before applying clear coat.
• General: Thoroughly clean the surface and allow it to dry. Remove any loose material. Sand glossy surfaces dull if applying over existing finishes.

Application Instructions: Stir clear finish thoroughly. Intermix containers for uniformity if needed. Apply only when surface, air, and product temperatures are between 50°F and 90°F (10°C – 32°C). Apply with a premium-quality brush, a short-nap synthetic roller cover, or airless sprayer (check label for specific spray settings). Thinning not usually required. Apply thin, even coats to avoid buildup or cloudiness.

Clean-up & Disposal: Clean tools and spills immediately with warm, soapy water. Do not pour unused product down the drain. Consult local authorities for proper disposal and recycling methods.

Specifications:

• Brand: Valspar
• Product Line: Pro-Hide Gold Ultra Interior [Assumed Compatible Product]
• Type: Interior Clear Finish / Topcoat
• Base: Water-Based
• VOC Level: Zero VOC* (Assumed for clear coat – Verify on label)
• Finish / Sheen: Flat / Matte
• Color: Clear / Transparent
• Size: 17.1 Litres
• Recommended Surfaces: Over compatible interior paint; interior wood, trim. Not for floors.
• Application Temperature: 50°F – 90°F (10°C – 32°C)
• Dry Time (@ 77°F / 50% RH): Assume similar to paint (1-4h touch / 2-4h recoat), but verify on product label.
• Cleanup: Warm, soapy water
• Key Features: Zero VOC (Assumed), Protective Topcoat, Flat/Matte Sheen, Durable, Preserves Underlying Color, Professional Grade Compatibility (Assumed).
• Weight: Information not provided
• Coverage Rate: 2000 sqft