Thompson’s WaterSeal Signature Series Stain & Sealer – Semi-Transparent Harvest Gold

Thompson’s® WaterSeal® Signature Series Semi-Transparent Wood Stain and Sealer provides durable, long-lasting exterior wood protection in just one coat. The Harvest Gold color is a pre-tinted, light brown shade that adds moderate, warm color while allowing the medium beauty of the wood grain to show through, enhancing your outdoor space.

This advanced water-based formula is designed to help prevent water damage and provide robust protection from harmful sun exposure. Lab-tested to exceed the ASTM-D4446 industry standard for waterproofing wood, it also provides a mold-and-mildew-resistant finish to keep your wood looking its best year-round. Perfect for new or bare wood decks, fencing, and siding, offering a beautiful and protective finish with the convenience of soap and water cleanup.

Key Features:

• Stain and Sealer in One: Provides both color and protection in a single product.
• One Coat Application: Delivers year-round protection with just one coat.
• Semi-Transparent Opacity: Adds moderate Harvest Gold color while allowing medium wood grain to show.
• Durable Protection: Guards against water damage and harmful UV sun rays.
• Waterproofs Wood: Exceeds Industry Standard ASTM-D4446.
• Mold & Mildew Resistant Finish: Helps maintain a clean appearance.
• Water-Based Formula: Easy cleanup with soap and water.
• Pre-Tinted: Ready to use in Harvest Gold color (not tintable further).

Product Application & Use:

Before You Begin (Important Precautions):

• Exterior Use Only: On wood substrates.
• New Pressure Treated Lumber: Allow at least 30 days before applying.
• Temperature & Weather: Ensure surface and air temperature are between 50°F – 95°F (10°C – 35°C) during application and for 48 hours after. Do not apply if rain is forecasted within 24 hours.
• Splash Test: Test surface porosity. Sprinkle water; if it absorbs and darkens within five seconds, the surface is ready. If water beads, protection is not needed.
• Restrictions: Do not use on clear coated wood, composite decking, concrete, previously stained wood, severely weathered wood, slightly weathered wood, or solid colored wood (best on new or bare wood). Do not use in below-grade applications or as an additive to paint.
• Protect Surroundings: Cover plants and shrubs.

Preparation Warning: WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects. Use proper protective equipment (NIOSH approved respirator) and containment/cleanup methods. Contact the National Lead Information Center for more details.

Surface Preparation:

1. For new or bare wood applications. Surfaces must be free of all mildew stains, dust, dirt, oil, soot, grease, and other contaminants.
2. Clean surfaces thoroughly prior to application with a suitable deck cleaner applied according to label directions.
3. If the surface is damp or wet, allow it to dry thoroughly (a minimum of 48 hours) before application.

Application Directions:

1. Do not mix with other waterproofing products. Do not thin.
2. Stir thoroughly before and occasionally during use to ensure color uniformity. (Note: “Shake Can Before Use: No” likely means avoid vigorous shaking that creates bubbles; stirring is essential for pigment).
3. Test Patch: Always apply to a small test area and let dry to determine final color and compatibility before proceeding with the entire project.
4. Apply: Use an exterior stain pad, brush, roller, or garden “pump-up” style sprayer.
5. Even Application: Apply one even coat. Keep the leading edge wet and distribute stain evenly to avoid lap marks. Work in manageable sections, using natural breaks as boundaries. If overapplied, remove excess before it dries by redistributing or wiping off.
6. Ventilation: Use only with adequate ventilation.

Dry Time:

• Dry to Touch: 1-2 hours
• Dry to Walk / Furniture Ready (Light Use): 24 hours (Drying time will vary depending on temperature and humidity.)

Specifications:

• Brand: Thompson’s WaterSeal
• Sub-Brand: Signature Series
• Product Type: Semi-Transparent Exterior Wood Stain and Sealer in One
• Base Material: Water-Based
• Color/Finish Family: Gold
• Stain Color / Manufacturer Color/Finish: Harvest Gold (Light brown category)
• Opacity: Semi-Transparent
• Size: 1 Gallon (128 Fluid Ounces)
• For Use In Location: Exterior
• Recommended Surfaces: Horizontal/Vertical new or bare wood surfaces like decks, fencing, and siding.
• Not Recommended For: Furniture & Cabinets (interior type), Composite Decking, Concrete, Clear Coated Wood, Previously Stained Wood, Severely/Slightly Weathered Wood, Solid Colored Wood, Toned Wood.
• Application Method: Brush, Paint Pad, Paint Sprayer, Roller.
• Coverage: Minimum 150 Sq. Feet – Maximum 400 Sq. Feet per gallon (varies with surface porosity and texture).
• Number of Coats Recommended: 1
• Cleanup: Soap and Water.
• Working Temperature: 50°F – 95°F (Minimum – Maximum Fahrenheit)
• Flash Point: 175°F
• UV Protection: Yes
• Waterproof: Yes (Exceeds ASTM-D4446)
• Mold Resistant / Mildew Resistant: Yes
• Algae Resistant: No
• Low VOC: No (Standard VOC)
• Flammable/Combustible: No
• Pre-Tinted: Yes (Not Tintable further)
• Stain and Sealer in One: Yes
• Weight (Approx. 1 Gal): ~8-10 lbs / ~3.6-4.5 kg (Estimate for 1 Gallon water-based product)
• Part Number/UPC/Model Number: Information Not Provided in this specific snippet structure

CAUTIONS / FIRST AID:

• Use only with adequate ventilation. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use.
• WARNING (California Prop 65): This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
• KEEP OUT OF THE REACH OF CHILDREN. (Always refer to the product label for complete and current safety information and first aid procedures.)