Minwax Fast-Drying Polyurethane Spray – Warm Satin, 11.5 oz Aerosol

Keep your interior wood projects looking beautiful and well-protected with the convenience of Minwax Fast-Drying Polyurethane Aerosol Spray. This oil-based clear sealer protective coating is one of the most durable options for wood, effectively shielding woodwork, furniture, doors, cabinets, and even small floor areas or touch-ups from scratches, spills, and daily wear.   

The clear top coat provides long-lasting protection and imparts a warm beauty to both finished and unfinished wood projects. The Warm Satin sheen offers a soft, unique luster for a modern, cozy, and on-trend look without excessive gloss. Its fast-drying formula allows for efficient project completion with specific recoat windows for optimal results. Ideal for items with intricate details, hard-to-reach areas, or for anyone seeking a smooth, brush-mark-free finish. Minwax is America’s leading brand of wood finishing and wood care products, trusted since 1904.  

Application Directions:

1. Surface Preparation: Ensure the surface is dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt, or other foreign matter.
2. Sanding: Sand to obtain a smooth, uniform surface. Remove all dust thoroughly.
3. Staining (Optional): If desired, apply Minwax stain to unfinished wood surfaces. Follow directions for application and ensure stain is completely dry before applying polyurethane.
4. Shake Can: Shake Minwax Fast-Drying Polyurethane spray can vigorously for two minutes. Continue to shake for 10 seconds occasionally during use.
5. Protect Surroundings: Protect adjacent areas from overspray. Wet overspray can be removed with mineral spirits.  
6. Spraying Technique: Hold the can vertically approximately 12 inches from the surface. Depress the button fully and spray using an even, sweeping motion with slightly overlapping strokes. On unfinished wood, apply sufficient material to seal open joints, edges, and end-grain.  
7. Apply Thin Coats & Recoat: Apply a THIN coat to avoid runs and sags. Recoat within 2 hours. If you cannot recoat within this 2-hour window, you must wait a minimum of 72 hours, then lightly sand the surface before applying the next coat.
8. Number of Coats: Apply at least three coats on unfinished wood and two coats on surfaces already finished for best durability.
9. Curing: After the final coat, allow 24 hours before subjecting the surface to normal use. Full cure takes longer.

Key Features:

• Durable Wood Protection: Aerosol application of a tough, clear finish resistant to scratches and spills.   
• Oil-Based Formula: Delivers exceptional durability and a rich, warm amber tone.   
• Warm Satin Sheen: Provides a soft, modern, and cozy luster.
• Fast-Drying with Specific Recoat Window: Recoat within 2 hours, or wait 72+ hours and sand.
• Aerosol Convenience: Easy to apply, ideal for complex shapes and achieving a smooth, brush-free finish.
• Versatile Interior Use: Perfect for woodwork, furniture, doors, cabinets, and small floor areas/touch-ups.   
• For Finished & Unfinished Wood: Suitable for a variety of interior wood projects.

Specifications:

• Brand: Minwax
• Product Type: Polyurethane Wood Finish Spray / Aerosol Varnish
• Manufacturer: Minwax (or The Sherwin-Williams Company)
• Part Number: 33060000
• Item Model Number: 33060000
• UPC: 027426330603
• Sheen: Warm Satin / Satin
• Color: Clear (imparts a warm amber tone)
• Base Type: Oil-based
• Size/Volume: 11.5 oz. Aerosol Can
• Recommended Uses For Product: Interior wood surfaces such as woodwork, furniture, doors, cabinets, small floor areas/touch-ups (both finished and unfinished wood).   
• Application Method: Aerosol Spray
• Dry Time & Recoat: Recoat within 2 hours OR after a minimum of 72 hours (lightly sand surface if recoating after 72 hours). Allow 24 hours before normal use.
• Number of Coats Recommended: At least 3 on unfinished wood, 2 on already finished surfaces.
• Item Weight: 0.9 Pounds (approx. 0.41 kg / 14.4 oz)
• Material (Contents): Oil-based Polyurethane (Can is “Man-Made-Material” – Metal)   
• Cleanup: Mineral spirits for wet overspray.
• VOC Level: Information Not Provided (Typically standard for oil-based aerosols)
• Coverage Area: Information Not Provided (Varies significantly with spray application and surface)
• Finish (General): Hardest of protective coatings
• Batteries Included?: No
• Batteries Required?: No
• Warranty Description: Warranty (as per manufacturer)