1/2 Pint can of Minwax Wood Finish Penetrating Oil-Based Stain in Golden Oak color (Part #221024444).

Minwax Wood Finish Penetrating Stain – Golden Oak, 1/2 Pint Oil-Based (221024444)

4 in stock

Please note that as this paint is mixed to order it cannot be returned or exchanged. For more information please see our full returns policy.

Quickly and easily give your wood projects a beautiful, rich color with Minwax Wood Finish. This oil-based wood stain enhances the natural wood grain in just one coat and resists lapping for an even color. It’s perfect for interior wood projects such as unfinished wood furniture, cabinets, doors, trim, molding, and floors, and can work on any bare or stripped wood surface. The Golden Oak shade offers a classic wood stain color, providing a beautiful, rich light oak appearance that is great for a wide variety of projects.

The special formula allows it to deeply penetrate wood pores within 5 minutes of application, and it dries in as little as two hours, making it possible to stain wood in just one day. To apply, just use a clean cloth or wood stain brush and apply in the direction of the grain. Wait 5-15 minutes and wipe away excess stain. The longer you wait, the darker/richer the color. Reapply coats for deeper color. Wait 4-6 hours before applying a wood sealer topcoat. Minwax is America’s leading brand of wood finishing and wood care projects. Since 1904, we have been inspiring consumers to Keep on Finishing.

Application Instructions (Summarized from Description):

  1. Surface Preparation: Ensure wood is bare, dry, and free of dirt, grease, or old finishes. Sand smooth in the direction of the grain and remove all dust. For soft or porous woods, pre-treat with Minwax Pre-Stain Wood Conditioner.
  2. Stir Stain: Stir Minwax Wood Finish stain thoroughly before and occasionally during use to ensure consistent color.
  3. Application: Apply stain liberally with a clean cloth or wood stain brush in the direction of the wood grain.
  4. Penetration: Allow the stain to penetrate the wood for 5-15 minutes.
  5. Wipe Off Excess: After desired penetration time, wipe off all excess stain thoroughly with a clean, lint-free cloth, wiping in the direction of the wood grain.
  6. Drying & Recoating (Stain): The stain typically dries in about 2 hours. If a deeper color is desired, a second coat of stain can be applied.
  7. Topcoat Application: Wait 4-6 hours (or longer, as specified on the can, depending on conditions) after the final stain application and wiping before applying a protective clear topcoat like Minwax Polyurethane or Polycrylic.

Key Features:

  • Rich, Even Color: Deeply penetrating oil-based formula enhances natural wood grain.
  • Golden Oak Hue: Provides a beautiful, rich light oak color; a classic choice.
  • Resists Lapping: Formulated for smooth, even color application.
  • Quick Drying (for stain recoat/touch): Dries in approximately 2 hours, allowing for faster project flow if building color.
  • Versatile Use: Perfect for interior staining of unfinished wood furniture, cabinets, doors, trim, molding, and floors.
  • One Coat Application (Typically): Enhances wood beauty in a single coat; additional coats can deepen color.

Specifications:

  • Brand: Minwax (Minwax Store)
  • Product Type: Penetrating Oil-Based Wood Stain
  • Model Name: Wood Finish (MINWAX – 221024444 – 8oz Golden Oak)
  • Manufacturer: Minwax
  • Part Number: 224504444
  • Item Model Number: 224504444
  • UPC: 0027426221024
  • Color: Golden Oak
  • Base Type: Oil-based
  • Coating Description: Oil-based
  • Finish Type (Stain): Penetrating Stain (imparts color; final sheen depends on topcoat).
  • Size/Volume: 1/2 Pint (8 Fluid Ounces / approx. 0.236 Liters)
  • Recommended Uses For Product: Interior staining projects such as unfinished wood furniture, cabinets, doors, trim, molding, and floors. For any bare or stripped wood surface.
  • Application Method: Clean cloth or wood stain brush.
  • Dry Time: Penetrates in 5-15 minutes. Dries in approximately 2 hours (for stain recoat/touch). Wait 4-6 hours (or longer per label) before applying a protective topcoat.
  • Coverage Area: Manufacturer states “[50-100] square feet” per 1/2 pint. (Actual coverage may vary significantly depending on wood porosity and application method; a typical estimate for 1/2 pint is 30-40 sq ft).
  • Item Weight: 8.8 ounces (0.55 Pounds / approx. 249 grams)
  • Product Dimensions (Can Approx.): 3 (L) x 3 (W) x 3 (H) inches (approx. 7.6 x 7.6 x 7.6 cm)
  • Cleanup: Mineral spirits or paint thinner.
  • VOC Level: Information Not Provided
  • Style: Wood Stain
  • Package Information: Can (Referred to as “Jar” in one field)
  • Compatible Material: Wood
  • Item Package Quantity / Number of Items: 1
  • Unit Count: 8.0 Fl Oz
  • Included Components: 1 x 1/2 Pint Can of Minwax Wood Finish Penetrating Stain, Golden Oak (MINWAX – 221024444 – 8oz Golden Oak)
  • Is Discontinued By Manufacturer: No
  • Batteries Included?: No
  • Batteries Required?: No
  • Warranty Description: Warranty (as per manufacturer)

Product Questions

Q1: What does the Golden Oak color look like on different woods?

Golden Oak is a classic wood stain that provides a rich, light oak color. On lighter woods like pine or poplar, it will impart a warm, golden honey tone. On woods that already have some color, like red oak, it will enhance the existing warmth and grain, giving it a more traditional golden oak appearance.

Q2: How accurate is the coverage estimate of 50-100 sq ft for this 1/2 pint can?

The manufacturer’s stated range of 50-100 sq ft for a 1/2 pint (8 fl oz) is quite generous for a penetrating stain. Real-world coverage will heavily depend on the type and porosity of the wood and how heavily you apply it. A more conservative estimate for many projects might be closer to 30-40 sq ft. It’s best for smaller projects or testing the color.

Q3: If the stain dries in 2 hours, why do I need to wait 4-6 hours before applying a topcoat like polyurethane?

The 2-hour dry time refers to when the stain is typically dry to the touch and ready for a second coat of stain if you want to deepen the color. However, oil-based penetrating stains need more time for their solvents to evaporate and for it to cure sufficiently before a topcoat can be applied without issues like poor adhesion, a soft finish, or a cloudy appearance. The 4-6 hour (or longer, check can) window ensures the stain is ready for sealing.

Delivery Schedule

Dispatch Timeline Examples

Notes

SKU 224504444 Categories , , Brand: , , ,

What are customers say

Brands we carry