Minwax Fast-Drying Polyurethane Spray – Clear Semi-Gloss, 11.5 oz Aerosol (33055000)

Minwax Polyurethane Wood Finish Aerosol spray provides a convenient way to protect and beautify your interior wood projects, including woodwork, furniture, doors, cabinets, and even floors (for small areas or touch-ups). This oil-based clear top coat is one of the most durable coatings for wood, offering excellent protection against scratches, spills, and everyday wear. It delivers long-lasting protection and adds warm beauty to both finished and unfinished wood.   

The Clear Semi-Gloss sheen gives your wood projects a sleek, semi-shiny finish that not only protects the natural beauty of the wood but also offers a modern, polished look. Its fast-drying formula and aerosol application make it easy to achieve a smooth, professional result, especially on detailed or hard-to-reach surfaces.   

Application Directions (Adapted for Aerosol based on general line instructions):

1. Surface Preparation: Ensure the surface is dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt, or other foreign matter   
2. Sanding: Sand to obtain a smooth, uniform surface. Remove all dust thoroughly (e.g., with a cloth dampened with mineral spirits).
3. Staining (Optional): If desired, apply Minwax stain to unfinished wood surfaces. Follow directions for application and ensure stain is completely dry before applying polyurethane.
4. Shake Can: Shake Minwax Fast-Drying Polyurethane spray can vigorously for about two minutes before use. Continue to shake for 10 seconds occasionally during use.
5. Protect Surroundings: Protect adjacent areas from overspray. Wet overspray can be removed with mineral spirits.   
6. Spraying Technique: Hold the can vertically approximately 12 inches from the surface. Depress the button fully and spray using an even, sweeping motion with slightly overlapping strokes to ensure a continuous film. On unfinished wood, apply sufficient material to seal open joints, edges, and end-grain.   
7. Apply Thin Coats & Recoat: Apply THIN, even coats to avoid runs and sags. It is critical to Recoat within 2 hours. If you cannot recoat within this 2-hour window, you MUST wait a minimum of 72 hours, then lightly sand the surface with fine-grit sandpaper (e.g., 220 grit) and remove dust before applying the next coat. This ensures proper adhesion between layers.
8. Number of Coats: Apply at least three coats on unfinished wood and two coats on surfaces already finished for optimal durability.
9. Curing: After the final coat, allow 24 hours before subjecting the surface to normal, light use. Full cure and maximum durability will take longer (refer to can instructions).

Key Features:

• Durable Wood Protection: Tough, clear finish resistant to scratches, spills, and wear.   
• Oil-Based Formula: Delivers exceptional durability and a rich, warm amber tone.
• Clear Semi-Gloss Sheen: Offers a sleek, semi-shiny, and modern look with good cleanability.   
• Fast-Drying with Specific Recoat Window: Follow critical recoat times for best results.
• Aerosol Convenience: Easy to apply, ideal for complex shapes and achieving a smooth, brush-free finish.
• Versatile Interior Use: Perfect for woodwork, furniture, doors, cabinets, and small floor areas/touch-ups.   
• Good Coverage: One can covers approximately 50-60 square feet.

Specifications:

• Brand: Minwax
• Product Type: Polyurethane Wood Finish Spray / Aerosol Varnish
• Manufacturer: Minwax
• Part Number: 33055000
• Item Model Number: Minwax – 27426330559
• UPC: 027426630559 (Primary; others listed in source: 355111173199, 304061111393, 000035718543)
• Global Trade Identification Number (GTIN): 00027426630055 (Note: This GTIN was associated with the Semi-Gloss Quart in previous data, UPC 027426330559 seems correct for this aerosol)
• Sheen: Clear Semi-Gloss
• Color: Clear (imparts a warm amber tone)
• Base Type: Oil-based
• Size/Volume: 11.5 Fluid Ounces Aerosol Can
• Recommended Uses For Product: Interior wood surfaces (woodwork, furniture, doors, cabinets, small floor areas/touch-ups – both finished and unfinished wood).   
• Application Method: Aerosol Spray
• Dry Time & Recoat: Recoat within 2 hours OR after a minimum of 72 hours (lightly sand surface if recoating after 72 hrs) (Assumed based on typical aerosol polyurethane application and previous product line information). Allow 24 hours before normal light use.
• Number of Coats Recommended: At least 3 on unfinished wood, 2 on already finished surfaces (General recommendation for this product line).
• Coverage Area: Approximately 50-60 square feet per can.
• Item Weight: 14.6 ounces (approx. 0.91 lbs / 414 grams)
• Product Dimensions (Can Approx.): 8.13 (H) x 2.69 (W) x 2.69 (D) inches (approx. 20.7 x 6.8 x 6.8 cm)
• Cleanup: Mineral spirits for wet overspray.
• VOC Level: Information Not Provided (Typically standard for oil-based aerosols)
• Item Form: Aerosol
• Style: Semi-Gloss
• Finish: Semi-Gloss
• Pattern: Polyurethane Protective
• Usage: Floors, Doors, Furniture, Cabinets
• Included Components: 1 x 11.5 oz Aerosol Can of Minwax Fast-Drying Polyurethane, Clear Semi-Gloss (Minwax – 274266330559)
• Batteries Included?: No
• Batteries Required?: No
• Is Discontinued By Manufacturer: No